Prime Garage Repair

Garage Door Faults – The Common 8 Problems And The Solutions 

Garage Door Faults Problems and Solutions

According to statistics, a garage door is opened and closed more than 1,500 times a year. If you think about it, this is a lot of heavy lifting, so it is not surprising that a garage door will often encounter faults or problems. This is a massive headache for many homeowners. The good news is several ways to quickly fix some of the most common spots without seeking a professional’s services.

Remember, even the most reliable garage door will need some repairs. These problems can be fixed by purchasing new parts, such as buttons. Here, however, are some of the most common garage door problems and how they can be repaired.

8 Common Garage Door Faults and Its Solutions

Below are some 8 common garage door faults and solutions. 

1. The Switch Is Not Working 

When you hit the switch to open the door, but nothing happens, this becomes a problem. Many types of faults can cause this to happen. It can be something as simple as a locked garage door. Remember, if the door is locked, it will not open until you hit the unlock button. Another possible minor problem may be an unplugged motor. To solve this problem, take a look at the motor connectors. They are connected to the lights near the ceiling, so you just have to plug it in, which will fix the problem. Do not forget to look at the circuit breaker; it may be tripping.

The complex possible problem may be related to the photo-eye sensor. Did you know that the two most common problems homeowners face are circuit breaker tripping and photo-eye sensor failure? First, ensure the sensor is not covered or clouded by anything. Secondly, troubleshoot to ensure the fuse is not burned out or the circuit breaker has tripped. If these do not solve the problem, it is time to call a professional.

2. The keypad Is Not Working 

Not every garage door uses a keypad to open. However, if your garage door has a keypad, it is essential to note that it can also become faulty. Before troubleshooting, it is wise to check if the battery is dead. Therefore, first, begin by replacing the batteries and trying to enter the keypad number. Another problem is that your keypad needs programming. To solve this problem, refer to the owner’s manual to see how you can achieve this. If you cannot locate the original manual, consider searching for the model online.

Its antenna may be faulty and not the keypad itself. If all else fails, it is time to call a professional because the problem is complex. Professionals are experienced at diagnosing issues and are aided with special tools.

3. The Remote Control Does Not Work 

Just like other faults, a faulty remote control can be annoying. Just like the keypad, begin by replacing the batteries. Did you know that batteries are often the problem when malfunctioning remote controls? Therefore, replace the battery and test if the remote control is working. Another problem may be that it is out of the range of the receiver. Try to get closer to the receiver and test if it is working.

If all these fail, the problem may be with the photo-eye sensors. Check the path to ensure the alignment is correct and nothing is in the way. Also, consider wiping the lenses to improve the signal. What about trying a smart garage door opener, check out benefits of smart garage door opener before using it.

4. The Door Does Not Open Or Close 

You can find multiple reasons why your garage door fails to open or close. The first problem may be the keypad or remote controller. Therefore, you should begin by ruling them off as the source of the problem. If they work correctly, rule them off and check if the garage door opener unit is disconnected. The problem may be a disconnected motor power supply, a blown fuse, or a tripped circuit breaker.

Try to eliminate power connection issues and controller issues. If you find that nothing is working correctly, it is time to contact a professional for help.

5. The Motor Is Running, But The Door Is Not Moving

This is a common issue, especially if one fails to maintain their garage door. Whenever it happens, the case may be that the limits are off. What does it mean? Well, it means that the door can move, but the motor will continue to run even after the door has stopped moving. This can happen whenever the door is opening or closing. To solve this issue, adjust the limit to tell the motor when to stop working. We recommend listening carefully to the sound produced when performing these actions.

However, if the door does not move at all, check the belt. Chances are, the garage door has disconnected from the belt. To reattach the belt, consider going through the owner’s manual. That is because each garage door follows a specific direction to reattach the belt. The belt will often disconnect itself when someone hits the emergency release cord.

6. A Noisy Garage Door

garage door

A noisy garage door signals that it has some problems. For example, a squeaking sound could mean the rollers need lubrication or simply that they are worn out. Another explanation is that the rollers may need replacement. The solution can be something as simple as applying a silicone-based lubricant.

If it is rattling or there is a rattling sound, it is a sign that something is loose. To solve this problem, tighten all the hardware. Go over all the bolts, nuts, and screws. A popping sound means that there is a problem with the spring. Torsion springs begin to produce a popping sound when they become loose or with minimum lubrication. Note: Changing or replacing a torsion spring can be dangerous, and we recommend having a professional do it.

7. The Garage Door Opens Unevenly

Sometimes the garage door may close or open ideally, but halfway begin malfunctioning. Whenever this happens, it means that the limits are off. Remember, the limits tell the motor when to start and stop. Consider going through your owner’s manual to know how to adjust the limits. Or sometimes you just need to upgrade your garage door opener.

In some cases, the solution could be as simple as clearing the tracks. The rollers and the trails are always susceptible to dust, dirt, rust, and damage. Before going the more challenging route of trying to adjust the limits, it is essential to start by cleaning the tracks and rollers to ensure there is no debris interfering with them. If this does not work, consider checking the spring system. Consider calling a professional if the spring has issues and needs replacing.

8. The Garage Door Opens And Closes Too Slowly 

Sometimes the garage door opens and closes fine, but very slowly. This is a sign of failing or dry rollers and tracks. It is important to note that garage roller and track dry faster in arid climates and the winter. Of course, this will make it difficult for the rollers to slide up and down the way. The simple solution is to wipe the way and lubricate it often. You need to know the ways to make your garage door last longer.

Basic Maintenance Tips

The good news is that a majority of garage door problems can be prevented through regular maintenance. In other words, having a proper maintenance schedule is a great way to avoid many catastrophic issues. Prevention is better than cure. Some prevention tips include: –

  • Ensure everything is tightened well. It is wise to constantly go through all the hardware and draw everything (the screws, bolts, and nuts).
  • Brush and lubricate the truck and rollers. The experts recommend doing this at least once a season to prevent wear and tear.
  • Investigate the springs and pulley system to ensure they are working correctly. Have them replaced if you see any signs of failure.

These are just some of the maintenance tips you should consider. If you experience a problem and fail to repair it, it is wise to consult a professional garage door repair in Toronto. A door installer and a repair technician will help you solve the problem.

Scroll to Top Call Now Button